Bio-Rad CHEF Mapper® XA System User Manual
Page 8
Advertising
![background image](/manuals/600263/8/background.png)
3. To check the date and time, press CLOCK READ. The date and time are displayed for 5
seconds. The time is displayed as hours:minutes:seconds, and the date is displayed as
month/day/year. The hours are in 24-hour time. For example, 3:00 pm is shown as
15:00:00. To set the clock or date, press CLOCK READ and DELAY START simulta-
neously. The display will be:
Current time: hh:mm:ss
Enter new hours [ ]
After you enter the hour, the cursor will move to minutes, then seconds. Pressing ENTER at
any of these prompts without entering a new value retains the original value. Next, the cur-
sor moves to month, day and year in the same manner.
The upgrade of the Mapper to be Year 2000 compliant is complete.
6
Advertising