Contents safety instructions – Bio-Rad Experion™ Vortex Station II User Manual

Page 7

Advertising
background image

7

122008

Page

CE-Declaration of conformity

2

Safety instructions

7

Scope of supply

8

Correct use

8

Using the device

9

Maintenance/ In case of repair

10

Technical data

10

For your protection

• Read the operating instructions in full before starting up and

follow the safety instructions.

• Keep the operating instructions in a place where they can be

accessed by everyone.

• Ensure that only trained staff work with the appliance.
• Follow the safety instructions, guidelines, occupational health

and safety and accident prevention regulations.

• The device must only be operated with the original plug-in power

supply unit.

• The power supply unit must be operated with the appropriate

country adapter.

• Wear your personal protective equipment in accordance with the

hazard category of the medium to be processed. Otherwise
there is a risk of:

- splashing liquids,
- projectile parts,
- body parts, hair, clothing and jewellery getting caught.

• Set up the appliance in a spacious area on an even, stable, clean,

non-slip, dry and fireproof surface.

• The feet of the appliance must be clean and undamaged.

• Firmly secure the Vortex adapter and the microfluidic chip in

place, otherwise the microfluidic chip could be damaged or pro-
jected out.

• Check the appliance and accessories beforehand for damage

each time you use them. Do not use damaged components.

• Beware of the risk of

- flammable materials,
- glass breakage as a result of mechanical shaking power.

• Only process media that will not react dangerously to the extra

energy produced through processing. This also applies to any
extra energy produced in other ways, e.g. through light irradiation.

• Do not operate the appliance in explosive atmospheres, with

hazardous substances or under water.

• The appliance does not start up again automatically following a

cut in the power supply.

• The appliance may heat up when in use.

For the protection of the equipment

• The voltage stated on the nameplate must correspond to the

mains voltage.

• Protect the appliance and accessories from bumps and impacts.
• The appliance may only be opened by experts.

Contents

Safety instructions

EN

Advertising