CDA SV470 - Manual (Page 7)

General Settings and Use
To programme the oven
Touch
Touch or until the required programme shows on display. The oven function display will suggest which level to
put the shelf according to the programme.
Touch to confirm. The oven will start cooking immediately.
Touch to activate temperature selection (to change from the preset temperature), touch or until the required
temperature shows on display, then touch to confirm the temperature selection.
To set the cooking time (the cooking starts immediately, and finishes at a programmed time), touch to activate
timer selection so the timer display shows , touch or until the required time shows on display, then touch to
confirm the timer selection. Touch to start the programme.
To set a delayed programme (the cooking starts and finishes at a programmed time), touch twice to activate timer
selection so the timer display shows and the time the programme is due to end (current time + cooking time), touch
or until the required time shows on display, then touch to confirm the timer selection. The timer display will
then show the set end time. Finally, Touch . When a delayed programme is set, the oven will go on to standby and
will show on the display until the programme starts.
To cancel a programme, touch .
At the end of the programme, the oven will beep three times
The current time will show in the display one minute after the programme ends.
If the oven must be preheated, switch on the oven as above. Once the preheat is complete, the upper bars on the
temperature indicator on the display will stay lit and the oven will beep three times, pause, and beep three times
again.
6