CITIZEN LINE THERMAL PRINTER CT-S601 - Manual (Page 25)

— 21 —
The printer can be used horizontally, vertically, or installed on a wall. However,
the CT-S601S (built-in power supply type) cannot be used vertically or installed
on a wall.
Use the optional stand for vertical applications, and the optional brackets for
wall installations. Please refer to the manual for further details.
Change the paper near-end sensor settings for vertical and wall installations.
(The factory setting for the paper near-end sensor is for horizontal installations.)
3.4 Precautions for Installing the Printer
Refer to 3.7 Adjusting the Paper Near-end Sensor
CAUTION
Do not use the printer under the following conditions.
„ Locations subject to vibration or instability.
„ Locations that are very dirty or dusty
„ Locations where the printer is not level.
• The printer may fall and cause an injury.
• The quality of printing may deteriorate.
„ Oriented other than as specified.
• The printer may malfunction, be damaged, or cause an electric shock.
Precautions for horizontal installations
„ Do not set cutting to full cut. Doing so may cause cutter jams.
Precautions for vertical/wall installations
„ Adjust the paper near-end sensor.
Horizontal position
Vertical position Wall installation