Chassis – Chrysler Crossfire SRT6 User Manual

Page 237

Advertising
background image

Chassis

Component

Fluids, Lubricants and Genuine Parts

Automatic Transmission

Only use ATF approved to MB 236.10, MB 236.12. Synthetic Dexron III

Transmission Fluid may be substituted.

Brake Master Cylinder

Use brake fluid approved to MB 331.0, or a DOT 4 brake fluid with: mini-
mum dry boiling point (ERBP) 500°F (260°C), minimum wet boiling point
(WERBP) 356°F (180°C), maximum viscosity 1500 mm

2

/s, conforming to

FMVSS 116 and ISO 4925.

Power Steering Reservoir

No fluid service required. Filled at the factory with Pentosin CHF 11S.
Steering noise and reduced component life may result if an unapproved
fluid is used.

Rear Axle Fluid

Only use synthetic SAE 75W-85 axle lubricant that meets MB 231.1. Re-
duced axle durability may result if an unapproved product is used.

Tire Pressure

Refer to label on driver’s door frame.

MAINTAINING YOUR VEHICLE

237

7

Advertising
This manual is related to the following products: