BlueAnt CONNECT Bluetooth Earpiece - Manual (Page 17)

17
Reset the Connect
If you are having problems with the Connect, you can reset it
and start again.
Resetting the Connect will clear all the stored pairing settings,
reset the volume orientation to the default and put the device
back into pairing mode.
To reset the Connect:
1. Delete any existing pairing information from your phone
and turn the phone off and back on again to clear the phone
memory.
2. Make sure the Connect is switched on but not connected to
any phones.
3. Hold down the Command button and Vol + together for
about 5 seconds.
4. The Connect will announce that it has been reset.
5. Now use the hardware switch to turn the Connect off and
back on again.
You will now need to pair your phone with the Connect again.