BlueAnt ENDURE Rugged Bluetooth Earpiece - Manual (Page 4)

Wearing the Endure
You can wear your
headset on either ear.
For best results:
> Position the hook
and ear gel as
shown here.
> Make sure the
headset is angled
towards your mouth.
Pair Your Headset
1. Slide the power switch across to turn the Endure on.
2. Put the Endure in your ear.
3. The fi rst time you use the Endure it will go straight to pair mode
and talk you through the pairing process.
For subsequent pairings, make sure the Endure is not connected to
any phones, then hold down the Command button. The Endure will
announce it is going into pairing mode.
Tip: The pairing code is 0000 (four zeros).
3
4
LEFT
EAR
RIGHT
EAR