BlueAnt Sense Speakerphone (S3 Compact) - Manual (Page 13)

EN
G
LI
SH
13
Pairing Another Phone / Multipoint
To pair another phone, put your SENSE back into pairing mode by holding down the
BlueAnt
symbol for about 6 seconds.
> Your SENSE can store pairing information for up to 2 phones.
> Your SENSE can connect to up to 2 phones at the same time (multipoint).
When 2 phones are connected at the same time:
> You can answer calls on either phone through the SENSE.
> Each time your phones reconnect to the SENSE the one that connects fi rst becomes the
“primary phone”. If you use the SENSE buttons to activate a feature on your phone (such
as redial, call back or phone voice dialing) then this action takes place on the primary
phone.