BlueAnt F4 Interphone Motorcycle Kit - Manual (Page 11)

After having turned INTERPHONE F4 off, press and hold the
MFB button until the warning light alternates red and blue
flashes. This will take about 8 seconds.
When the light is flashing red/blue alternately your INTER-
PHONE F4 is in pairing mode, go to the Bluetooth menu in
your telephone and select search for devices (please refer to
the telephone or navigator manual).
The telephone or navigator will detect INTERPHONE F4.
Simply select it, and enter the numerical code 0000.
To use with a mobile telephone and GPS navigator at the
same time, see point 2.4.
2.2 Intercom
Pairing
With two INTERPHONE F4 devices, you can use the Inter-
com function.
After having turned the two INTERPHONE F4s off, press and
hold the MFB buttons on both until the warning light alter-
nates red and blue flashes. This will take about 8 seconds.
When both LEDs flash red/blue alternately, press and release
the MFB button on one of the two INTERPHONE F4s.
The two INTERPHONE F4s are connected when both LEDs
show a fixed blue light.
NOTE ON COMPATIBILITY WITH OTHER INTERPHONE MODELS
The INTERPHONE F4 intercom connection is also compatible with pre-
vious INTERPHONE Cellular Line® devices.
Pairing: press and hold the MFB buttons on both until the
warning light alternates red and blue flashes. For INTER-
PHONE F4 this will take about 8 seconds, for INTERPHONE,
about 5 seconds.
When both devices flash red/blue alternately, press and rele-
ase the INTERPHONE F4 multipurpose button (the red and
blue LED will flash more quickly).
Wait a few seconds, and when the devices are connected,
the INTERPHONE F4 LED will remain fixed blue, whilst that
of INTERPHONE will flash blue quickly.
2.3 Stereo (A2DP)
Pairing
To use the Stereo (A2DP) function, you will need INTER-
PHONE F4 in configuration mode: After having turned IN-
TERPHONE F4 off, press and hold the MFB button until the
warning light alternates red and blue flashes. This will take
about 8 seconds.
When the light is flashing red/blue alternately, ask the mu-
sical player you intend to use, to search for devices (please
refer to the instructions given in the device manual). If the
musical player so requires, enter the numerical code 0000.
Once connected, the INTERPHONE F4 LED will flash blue.
2.4 Audio GPS
Pairing
GPS NAVIGATORS use the TELEPHONE (headset) profile for
audio connection: to use a telephone whilst using a navi-
gator, you will need to use the specific function of the GPS
device. For further information and settings, please consult
the navigator manual.