Calyx Kong Purple - USB Headphone Amplifier - Manual (Page 6)

Calyx Kong Purple Hi-Fi USB Headphone Amplifier
Digital & Analog Co., Ltd. (Rev. 1.0) -6-
5. Trouble-Shooting
Problem Check
There is no light
► Check that the USB cable is properly connected.
► If the driver is corrupted, uninstall the driver from the device manager, and
then reconnect the USB cable.
► If the driver is corrupted, scan your PC to check the virus.
There is no sound
► Check that the volume level is set to minimum.
► Check that your PC is not in mute mode.
► Check that the USB cable is properly connected.
► Check that your headphone (or active speaker) is properly connected.
► Check that your headphone (or active speaker) operates normally.
※ For more frequently asked questions (FAQ’s), technical advice and information on getting the most out of your
Calyx Kong, please visit the Support section on Calyx Amp’s website: www.calyxamp.com
6. Specifications
◎ Function
● USB - DAC
● Volume Control
● Preamp for Active Speakers
◎ Specifications
- THD+N < 0.008%, 1kHz, >10kΩ
- THD+N < 0.01%, 1kHz, 32Ω
- SNR -98dB @ 1kHz, 32Ω
- Channel Separation -70dB @ 1kHz, 32Ω
- Dynamic Range 98dB, 32Ω
- Bandwidth limit = 140kHz @ -3dB, 32Ω
- Volume Control = 0 ~ -64dB
◎ Dimension
- Net Dimension : 52mm X 86mm X 22mm (Width X Depth X Height)
- Net Weight : 167g