Camlink Video LED lamp 320 LEDs - Manual (Page 3)

3
©2012 NEDIS BV. Camlink is a registered trademark of NEDIS BV. Although every effort
has been made to ensure the accuracy of the information contained in this manual
specifications are subject to change and therefore NEDIS BV cannot guarantee its
correctness and completeness at all times.
EN – English
Adjustable Colour Temperature Video LED Lamp
Introduction
This video LED Lamp with variable light output allows the HDSLR and
camcorder user to produce a maximum light output equal to approximately
200 watts of incandescent light. You can also adjust the colour temperature
to match the ambient light's colour temperature, all with a unit that can be
attached to the camera's shoe. Optionally, two or more lights can be stacked
together.
Package contents:
• Video LED Lamp
• 7.2 V Li-ion battery
• AC power supply
• Battery charger
• Diffuser
• Swiveling hot shoe mount
Technical specifications
• Light source: 160 white high power LEDs
160 yellow high power LEDs
• Colour temperature: 2800 – 6500 K
• Light intensity: 1536 lm
• Dimmer: Stepless 0 – 100 % brightness
• Battery: 7.2 Li-ion battery
• Power: 7AC 9 V / 2.0 A
Safety precautions
To reduce risk of electric shock, this product
should ONLY be opened by an authorized
technician when service is required. Disconnect
the product from mains and other equipment if a
problem should occur. Do not expose the
product to water or moisture.
Maintenance
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.