Carlo Gavazzi UDM35/40 & USC User Manual
Page 9
UDM 35/40 PANEL METER USER MANUAL
8
Scaling the Inputs
When
is displayed, access is available for configuring the
electrical input range, the decimal point position and display span as
follows:
Electrical Input Range (HiE and LoE)
Allows the operator to define an electrical input range different from the
standard range setup at the “inP” programming step. As example, a UDM
with a full-scale 20mA (19.99mA) setting, it is possible to select an
electrical input range from 4.00mA (Lo.E) to 19.99mA (Hi.E) by
proceeding as follows:
When
is displayed, press
. “LoE” will appear.
Using the
key, toggle to select a digit, then press the
or
key to
choose the desired value. Using the
key, repeat as necessary until all
digits have proper values. Press
.
“HiE” will now appear.
Using the same procedure as above, toggle through the digits using the
key and choose the desired values with the
or
key. Press
to
confirm and advance to the next parameter, Decimal Point Position.