Canon Image Formula P-215 - Manual (Page 102)

102
5
Click [OK] to close the scanner properties.
Under Mac OS X
1
Start CaptureOnTouch.
2
Click [Scan First].
3
Click [OFF] next to [Scans in the full auto mode].
4
Click the [Scanner setting] button.
5
Click [ON] next to [Use advanced settings dialog box].
6
Click .
This will open the advanced settings dialog box for the scanner.
7
Click to display the [Scanner Information] dialog box.
8
Click [Maintenance] to display the [Maintenance] dialog
box.
9
Reset the counters.
If you replaced the feed rollers, click [Reset] for [Current Rollers
Count].
If you replaced the separation pad, click [Reset] for [Current Pad
Count].
10
Click to close the [Maintenance] dialog box.