Canon FB620P - Manual (Page 19)

19
2. Confirm that the scanning unit is at the front of the scanner.
First check to make sure that all documents have been
removed from the document glass. Then close the docu-
ment cover, and after you have plugged the power cord
plug into the scanner, plug the AC Adapter into the
electrical outlet. Check to see that the scanning unit has
correctly returned to the front of the scanner, then unplug
the AC adapter from the electrical outlet. Lastly, unplug
the power cord plug from the scanner.
3. Lock the scanning unit by
pushing the lock switch
toward the lock mark ( ).
• Carrying or transporting the scanner without locking the scanning unit
may damage it. Be particularly careful to lock the scanning unit when
transporting the scanner in a vehicle.
Scanning Unit
Confirm that the
scanning unit is in
this position
Lock Switch Locked Position