Cooper Instruments & Systems DFI INFINITY B Ultra High Performance Digital Force Indicator - Manual (Page 59)

23.0 ALARM CONFIGURATION MENU FLOWCHART
24.0 ALARM CONFIGURATION MENU: (AL.CNFG)
SP3 and SP4 are often used as Alarm1 and Alarm2, because they have single-sided hysteresis and can be configured for
latching action. The levels of these Setpoints are entered during run mode via the front-panel pushbuttons (refer to
Setpoint Settings Menu Configuration Section 8).
CF 156 54 M2544/N/0505