COVIDIEN Filac™ 3000 EZ/EZA Electronic Thermometer - Manual (Page 6)

Filac ™ 3000 EZ/EZA Electronic Thermometer
3
Table of Contents
IV. Icon Identification
Authorized
representative in the
European Community
Manufacturer
Date of Manufacture
AXILLARY
Temperature Mode
Works only with BLUE probe
and isolation chamber
Site Button
Use to change
measurement location
ORAL
Temperature Mode
Works only with BLUE probe
and isolation chamber
°C/°F Button
Use to change
temperature scale
RECTAL
Temperature Mode
Works only with RED probe
and isolation chamber
Install/Remove Probe Cover
Flashing probe cover reminder
to install probe cover prior to
use and remove cover after use
Direct Mode
Non-predictive temperature
measurement mode
Humidity limitations
10%
95%
Temperature limitations
-13°F
-25°C
131°F
55°C
Follow instructions for use -
This manual must be read prior
to use of the thermometer
(Symbol appears blue
on device)
Non-ionizing
electromagnetic radiation
Keep dry
Manufacturer
Serial Number
Keep away from sunlight
Type BF Equipment
Degree of protection against
electrical shock – no
conductive connection
to the patient
CE mark
0123
Medical Electrical
Equipment
EN 50419
Dispose of as Electrical and
Electronic waste
Dead Battery
Unit will not operate until
new batteries are installed
Low Battery
Battery voltage is low – replace
batteries as soon as possible
Progress Bar
Temperature measurement
status indication
Out of Range - High
Temperature measurement
is above 109°F (43°C)
By prescription only
Single use
Out of Range - Low
Temperature measurement
is below 86°F (30°C)
Latex-free
DEHP-free
Non-Sterile