Yealink SIP-T38G - Manual (Page 118)

User Guide for the SIP-T38G IP Phone
108
The phone LCD screen will prompt receiving a new voice mail and a flashing icon.
Note
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to
answer the call. Follow the voice prompt from the system server to leave the voice mail,
and then hang up after completing the voice mail.
To configure voice mail access codes via phone user interface:
1. Press Menu->Messages->Voice Mail->Set Voice Mail.
2. Press the navigation keys to highlight the account which you want to set.
3. Press the 123soft key to select the proper input mode and then enter the voice mail
access code (e.g. *97).
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
To listen to the voice mails:
1. When the phone user interface prompts receiving new voice mails, press or
Voice Mail feature is not available on all servers, contact your system administrator for
more information.
Voice mail access code must be predefined on the system server. Contact your system
administrator for the more information.