Yealink SIP-T48G - Manual (Page 124)

User Guide for the SIP-T48G IP Phone
114
The SIP-T48G IP phone supports up to 3 parties (including yourself) in a conference call.
This is the default method of conference called Local Conference.
To set up a local conference call:
1. Place a call to the first party.
2. When the first party answers the call, tap the Conference soft key to place a new
call.
The active call is placed on hold.
3. Enter the number of the second party, and then press , , or tap the Send
soft key.
4. When the second party answers the call, tap the Conference soft key again to join
all parties in the conference.
You can create a conference between an active call and a call on hold by tapping the
Conference soft key.
To join two calls in a conference:
1. Place two calls using two different accounts on the phone (for example, place the
first call using account 1, and then place the second call using account 2).
2. Tap the desired call for conference and make sure the call is active (for example,
tap the call on account 1).