Motorola T505 - Manual (Page 9)

English
8
Turning On and Off
To turn your T505 on, press and hold the Power button until you hear an ascending tone sequence, and the main
indicator light flashes blue three times.
To turn your T505 off, press and hold the Power button until you hear descending tone sequence, and the main
indicator light flashes blue three times.
Your T505 automatically powers down when not connected to a Bluetooth device for 30 consecutive minutes.
Configuring your MOTOROKR T505
Your MOTOROKR T505 uses a default set of configuration settings. You may change the default settings at anytime.
To modify T505 configuration settings, enter setup mode by pressing and holding the Call button while powering
up. The main indicator is steadily lit in green to indicate your T505 is in setup mode.
There are four configurable settings in your T505 (default setting in italics).
1 Voice prompt language
Description: Set language for voice prompts
Options:
English, French, Spanish, German, Italian.
2 Caller ID
Description: Hear the phone number of the incoming caller
Options:
On or Off
3 Voice prompt type
Description: Replace spoken prompts with tones (FM stations are always spoken)
Options:
On or Off
4 Voice prompt volume
Description: Adjust the loudness of the voice prompts (or tones)
Options:
Seven volume levels
For each setting, press the Volume up and down keys to select a different option. To make a selection, press the
Play/Pause key. The main indicator light flashes green to confirm your selection.
Upon completing configuration, your T505 plays power up tones and enters the standard power up sequence.
If you fail to complete all four customization settings, your T505 will not save your changes.