Motorola SURFboard SBG901 - Manual (Page 44)

B
6 • Advanced Pages 43
Field Descriptions for the Advanced Options Page
Field Description
WAN Blocking Prevents the SBG901 Configuration Manager or the PCs
behind it from being visible to other computers on the
SBG901 WAN.
Checkmark Enable to turn on this option.
IPsec PassThrough Enables the IPsec Pass-Through protocol to be used through
the SBG901 Configuration Manager so that a VPN device (or
software) may communicate properly with the WAN.
Checkmark Enable to turn on this option.
PPTP PassThrough Enables the Point-to-Point Tunneling Protocol (PPTP) Pass-
Through protocol to be used through the SBG901
Configuration Manager so that a VPN device (or software)
may communicate properly with the WAN.
Checkmark Enable to turn on this option.
Remote Config Management Allows remote access to the SBG901 Configuration Manager.
This enables you to configure the SBG901 WAN by accessing
the WAN IP address at Port 8080 of the configuration
manager from anywhere on the Internet. For example, in the
browser URL window, type http://WanIPAddress:8080/ to
access the SBG901 Configuration Manager remotely.
Checkmark Enable to turn on this option.
Multicast Enable Allows multicast-specific traffic (denoted by a multicast
specific address) to be passed to and from the PCs on the
private network behind the configuration manager.
Checkmark Enable to turn on this option.
UPnP Enable Turns on the Universal Plug and Play protocol (UPnP) agent in
the configuration manager. If you are running a CPE (client)
application that requires UPnP, select this box.
Checkmark Enable to turn on this option.
Rg PassThrough Disables NAT operation allowing all client computers to act as
passthrough clients.
Checkmark Enable to turn on this option.
PassThrough Mac Addresses Specifies up to 32 computers as passthrough clients not
subject to NAT, using their MAC addresses.
To enable this feature, your cable operator may need to
provide additional public IP addresses.
When done, click Apply to save your changes.