Display, Display assembly, Removing the display assembly – Dell Inspiron M5040 User Manual

Page 55: 3 remove the two screws from the computer base

Advertising
background image

15

Display

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your

computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist

grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery,

see "Removing the Battery" on page 13, before working inside the computer.

Display Assembly

Removing the Display Assembly

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery. See "Removing the Battery" on page 13.
3 Remove the two screws from the computer base.

Display

55

Advertising
This manual is related to the following products: