Replacing the display panel – Dell Inspiron M5040 User Manual
Page 63
1
2
3
1
tape
2 display-board connector
3
display cable
Replacing the Display Panel
1 Follow the instructions in "Before You Begin" on page 9.
2 Attach the display cable to the back of the display panel.
3 Connect the display cable to the display-board connector and secure it
with the tape.
4 Align the screw holes on the display bracket with the screw holes on the
display panel and replace the four screws (two on each side).
5 Route the display cable and Mini-Card antenna cables through the routing
guides on the display hinges.
6 Align the screw holes on the display panel with the screw holes on the
display cover and replace the six screws.
7 Replace the display bezel. See "Replacing the Display Bezel" on page 60.
8 Replace the display assembly. See "Replacing the Display Assembly" on
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
Display
63