Replacing the camera module – Dell Inspiron M5040 User Manual

Page 66

Advertising
background image

2

3

4

1

1

display cover

2 tabs (2)

3

camera module

4 camera cable

Replacing the Camera Module

1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Use the alignment posts on the display cover to snap the camera module

into position.

4 Replace the display bezel. See "Replacing the Display Bezel" on page 60.
5 Replace the display assembly. See "Replacing the Display Assembly" on

page 58.

6 Replace the hinge cover. See "Replacing the Hinge Cover" on page 53.
7 Follow the instructions from step 3 to step 7 in "Replacing the Palm-Rest

Assembly" on page 32.

8 Replace the battery. See "Replacing the Battery" on page 14.

CAUTION:

Before turning on the computer, replace all screws and ensure that no

stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

Camera Module

66

Advertising
This manual is related to the following products: