HP LaserJet 1320 - Manual (Page 98)

Light status State of the printer Action
Reconfiguration Initialization
During the printer start up, you
can request special
initialization sequences that
reconfigure the printer. When
one of the sequences is
requested, such as Cold Reset,
the lights cycle as in the
Initialization/Startup state.
During the Reconfiguration
process, pressing buttons has
no effect.
Ready
The printer is ready with no job
activity.
To print a Configuration page,
press and hold the
G
O
button
for 5 seconds.
To print a Demo page, press
and release the
G
O
button.
Processing Data
The printer is processing or
receiving data.
To cancel the current job, press
the
C
ANCEL
button.
Control panel light message (continued)
88 Chapter 6 Problemsolving ENWW