Samsung Galaxy S III - Manual (Page 59)

Call Functions 53
– Tap Speaker again to use the phone’s earpiece (see “Using
the Speakerphone During an Active Call” on page 55). The
green line will disappear when Speaker is not activated.
• Mute/Unmute turn the onboard microphone either on or off.
– Tap Mute during a call to mute the microphone. A green line
will appear under the Mute button.
– Tap Mute again to unmute the microphone. The green line will
disappear when Mute is not activated.
• Headset connects to a Bluetooth headset.
– Tap Headset during a call to activate a Bluetooth headset. A
green line will appear under the Headset button.
– Tap Headset again to de-activate the Bluetooth headset. The
green line will disappear when the Headset is not activated.
• Press for more options:
– Contacts: allows you to go to your Contact list.
– Memo: allows you to jot down a memo during a call.
– Noise Suppression On/Off: allows you to turn on the Noise
Suppression feature when you are in a noisy area. Turn it Off
when not needed to conserve battery power.
– In-call sound EQ: assigns a sound equalizer preset for use
during an active call. Sometimes you might need the sound to
be softer, clearer, or optimized for one ear or the other.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
1. While on a call, tap Hold . This action places
the current caller on hold.
2. You can later reactivate this call by tapping Unhold
.
To make a new call while you have a call in progress
1. Tap Hold .
2. Tap Add call to display the dialer.
3. Enter the new number and tap .
Once connected, the active call will appear in a large
box in the middle of your screen and the call on hold
will appear in a small box in the upper right corner of
your screen.
Hold
Unhold
Hold