Samsung intensity 2 - Manual (Page 122)

Settings 117
• Missed Call: Choose a Tone, Vibrate setting and Reminder
options for missed call alerts.
• Device Connect: Choose whether a tone is played when you
connect the phone to another device with a USB cable
• Battery Charge Alert: Choose Alert or Vibrate to have the phone
alert you when battery charging is complete, or choose Off.
Keypad Sounds
Choose a tone for keypad presses.
1. From the Home screen, press the Center Select Key
to select MENU ➔ Settings & Tools ➔ Sounds
Settings ➔ Keypad Sounds.
2. Use the
Directional Key to highlight Default or Lucid,
then press the Center Select Key SET.
Keypad Volume
Set the volume of tones played for keypad presses.
1. From the Home screen, press the Center Select Key
to select MENU ➔ Settings & Tools ➔ Sounds
Settings ➔ Keypad Volume.
2. Press the
Directional Key or volume key to highlight
a volume level, Off, Low, Medium Low, Medium, Medium
High, or High, then press the Center Select Key SET.
Digit Dial Readout
Enable or disable the readout of numbers as you dial.
1. From the Home screen, press the Center Select Key
to select MENU ➔ Settings & Tools ➔ Sounds
Settings ➔ Digit Dial Readout.
2. Select On to have the phone read the numbers as you dial
them in the Dialer, or Off to disable readout.
Service Alerts
Enable or disable sounds your phone plays to notify you of
changes in system or service status.
1. From the Home screen, press the Center Select Key
to select MENU ➔ Settings & Tools ➔ Sounds
Settings ➔ Service Alerts.
2. Choose On or Off for these Service Alerts:
• ERI: Your phone plays a tone when you enter and exit network
coverage areas.
• Minute Beep: While on a call, your phone beeps at every minute.
• Call Connect: Your phone alerts when a call connects and ends.
• Software Update: Your phone plays an alert when a software
update is complete.
u460.book Page 117 Tuesday, June 8, 2010 5:09 PM