Scangear (scanner driver) does not start – Canon mp280 User Manual
Page 649
Advertising
Advanced Guide
>
Troubleshooting
>
Problems with Scanning
> ScanGear (Scanner Driver) Does Not Start
S903
ScanGear (Scanner Driver) Does Not Start
Check 1: Make sure that the MP Drivers is installed.
If it is not installed, insert the
Setup CD-ROM
into the computer's disc drive, then select Custom Install
and install MP Drivers.
Check 2: On the File menu of the application, select Select Source and
select the machine.
Important
Do not select the model name that includes WIA in it.
Note
The operation may differ depending on the application.
Check 3: Start from a TWAIN-compliant application.
Page top
Page 649 of 707 pages
ScanGear (Scanner Driver) Does Not Start
Advertising