Panasonic 6.0 plus - Manual (Page 12)

Before Operating the Handset
12 Document Version 2008-01
Adjusting the Ringer Volume
• To set the ringer pattern, see page 49.
Adjusting the Ringer Volume or Turning the Ringer off while Ringing
*1 The adjusted volume level will also be used for subsequent calls.
• If you attach the headset while receiving an incoming call, the ring from the handset
does not switch to the headset. If you attach the headset before receiving an incoming
call, and headset tone is set to on, a tone will be heard from the headset. If Vibrate is
set to on, the handset will vibrate whether a headset is attached or not.
Adjusting the Ringer Volume
Press the Joystick. Select “
Ringer Volume
”.
Press the Joystick. Select the desired set-
ting. (Step Up/Step
Down
/Level 1-6/Off)
Press the Joystick.
Adjusting the Ringer Volume or Turning the Ringer off
while Ringing
While receiving a call
[To adjust the ringer volume]
Move the Joystick UP or DOWN to adjust the volume.
*1
[To turn the ringer off]
OR
Press the Joystick. Press CANCEL.