Bissell Spot Bot 88D6 series - Manual (Page 7)

Back view
Handsfree cleaning window
Provides an area to see the handsfree
cleaning action.
Tough Stain brush storage
Use for convenient on board storage of the Tough
Stain Brush when using handsfree cleaning.
Power cord
Stores on the back of the unit around the oval
cord wrap.
NOTE: Unwrap the power cord completely
before operating the unit.
Cord wrap
Serves as a guide for the power cord storage. The
cord wrap can be gently pushed in during use.
Getting ready
1. To fill the clean/solution tank:
A.
Remove the clean/solution tank by lifting it
straight up and then away from the unit.
b. Unscrew the cap/insert at the bottom of
the clean/solution tank.
There are 2 ways you can fill and use the clean/
solution tank:
2. For common stains such as dirt, grime, pet,
or oily stains, use the fill lines on the left
side of the tank and fill with Little Green ™
for Compacts formula (trial size included)
and water.
3. For dye based stains such as coffee, fruit
juices, cola and red wine, use the fill lines on
the right hand side of the unit and fill with
Little Green for Compacts and Oxy GEN2
formulas (trial size included) and water.
To begin cleaning
1. Plug your SpotBot in. The Power light will
illuminate instructing you that there is power
to the unit and it is ready to go.
2. Place the filled Clean/Solution tank onto the
unit.
S
pecial features
O
peration
7
w w w . b i s s e l l . c o m
Tip:
Before spot cleaning with
the SpotBot's handsfree
feature, dry vacuum the
area first.
A b
2 3
WARNING:
Do not use without
tanks in place.