Bissell 53W1 - Manual (Page 8)

w w w. b i s s e l l . c o m
O
perations
8
2a. Release collection tank latches
(on each side) by pulling up from the
bottom of latch and then out.
2b. Carefully remove the top of the
tank by lifting up on the tank handle.
3. Carry collection tank to a toilet or sink.
To empty, pour out contents using
opening at back of tank.
4. Rinse collection tank thoroughly and
replace on unit.
5. Refill solution tank and continue cleaning.
Cleaning with attachments
Your deep cleaner is equipped with a
hose and at least one attachment for
cleaning stairs, upholstery, and more.
1. Important! If using to clean upholstery,
check upholstery tags.
1a. Check manufacturer’s tag before clean-
ing. “W” or “WS” on the tag means you
can use your deep cleaner. If the tag is
coded with an “X” or an “S” (with a diag-
onal stripe through it), or says “Dry Clean
Only”, do not proceed with any deep
cleaning machine. Do not use on velvet or
silk. If manufacturer’s tag is missing or not
coded, check with your furniture dealer.
1b. Check for colourfastness in an
inconspicuous place.
1c. If possible, check upholstery stuffing.
Coloured stuffing may bleed through
fabric when wet.
1d. Plan activities to allow upholstery time
to dry.
1e. Vacuum area thoroughly.
2. Follow the instructions on page 7 for filling
the tank.
3. Set the ReadyTools dial to the “TOOLS” setting.
4. Attach the cleaning tool to the end of the hose.
note: if your deep cleaner came with
a deep Reach tool, do not follow the
cleaning instructions in this section.
instead, follow the "cleaning with
deep reach tool" instructions in the
next section.
Empty the collection tank continued
4.
3.
2a.
3.
2b.