Bissell 2080 - Manual (Page 9)

When your done continued
5. Wrap power cord around Quick Release Cord
Wrap ™ on side of deep cleaner.
6. Wipe all surfaces with a soft cloth. Store
cleaner upright in a protected, dry area.
nOTE: you may have cleaning solution
remaining in the clean water/solution tank.
you may store your deep cleaner this way
for the next cleaning task, but never keep
soiled solution in the collection tank.
Install the replacement brush belt
*PetWash PowerBrush (2080 series) only
1. Turn the power switch OFF and unplug from
wall outlet.
2. Remove clean water/solution and
collection tanks.
3. Lie machine down to access the bottom of
the machine.
4 . With a Phillips head screwdriver ,
unscrew the brush cover and remove.
5. Remove the brush end cap and remove belt
from brush.
6. Brush can now be removed.
7. Belt can be removed by sliding off the
motor pulley.
8. Clean or replace belt, attach belt to motor
pulley and brush and insert brush into right
side end cap.
9. Reattach the left end cap and slide brush
back into place.
10. Replace the brush cover and screw
into place.
M
aintenance and care
9
w w w . b i s s e l l . c o m
CAUTIOn:
Do not store unit where
freezing may occur. Damage
to internal components
may result.
Brush Cover
1 2
3 4
5 6
7 8
9