Bissell 81L8E - Manual (Page 6)

w w w . b i s s e l l . c o m
A
ssembly
6
Storing in the in-use position
1. To store with the floor nozzle attached,
insert the storage clip (located on the back
of the floor nozzle) into the storage slot on
the rear of the vacuum.
2. To store without the floor nozzle attached,
insert the storage clip (located on the bot-
tom of the telescoping extension wand) into
the storage slot on the rear of the vacuum.
Storing in the upright position
1. To store with the floor nozzle attached,
stand the vacuum in the upright position
and insert the storage clip (located on the
back of the floor nozzle) into the storage
slot on the bottom of the vacuum.
2. To store without the floor nozzle attached,
stand the vacuum in the upright position
and insert the storage clip (located on the
bottom of the telescoping extension wand)
into the storage slot on the bottom of the
vacuum.
2
.
2
.
1.
1.