Warning, Aintenance and care, Empty the dirt cup continued – Bissell 4490e User Manual

Page 7: Cleaning the dirt cup filter

Advertising
background image

w w w. b i s s e l l . c o m

7

M

aintenance and care

empty the dirt cup continued

4. Choose an emptying method. method

#2 is recommended for allergy suffers.

Method #1 – hold the dirt cup over a

rubbish bin and push the emptying button

to open the bottom. Close the bottom after

the dirt empties.

Method #2 – Place a plastic bag over the

bottom of the dirt cup. Push the emptying

button through the plastic to open the

bottom. After the dust settles, close the

bottom and remove the bag to discard.

5. Replace the dirt cup by placing it back into

the vacuum and pushing down on the carry

handle until it snaps back into place.

cleaning the dirt cup filter

use only bissell replacement filters

in your vacuum.
1.
Unplug the vacuum from the electrical outlet.
2. The dirt cup filters can be reached by remov-

ing the dirt cup from the vacuum, grasping

the handle on the bottom of the dirt cup filter

assembly and turning counter clockwise to

unlock. Pull straight down to remove.

3. Remove the dirt cup filter screen by

grasping the bottom of the filter frame

base and pulling straight up.

4. Parts separate by slowly pulling vertically

upwards on the filter. Do not use

excessive force.

5. The dirt cup filter screen and dirt cup filter

can be hand washed in cold water with

a mild detergent. Rinse well and air dry

thoroughly before placing back onto the

filter frame base.

6. Attach the dirt cup filter back onto the

filter frame base by lining up the tabs on

the filter base with the notches on the dirt

cup filter and turning clockwise to lock

back into place.

7. Attach the dirt cup filter screen back on to

the dirt cup filter by sliding it down over the

dirt cup filter, making sure that the tabs on

the bottom of the dirt cup filter screen line up

with the notches on the dirt cup filter.

4.

WaRning:

To reduce the risk of electric shock,

turn power switch OFF and dis-

connect plug from electrical outlet

before performing maintenance or

troubleshooting checks.

2.

3.

emptying

Button colours

may vary

from

models

shown

colours may

vary from

models shown

Advertising
This manual is related to the following products: