Bissell 69P3-E - Manual (Page 7)

w w w . b i s s e l l . c o m
7
O
perations
Special on-board tools
Your vacuum is not only a powerful
carpet and rug cleaner, it’s also a
versatile above floor vacuum cleaner
when you select one of the special tools.
1. Raise the handle to the upright position.
2. Grasp the hose wand handle to separate
from hose wand base.
3. Attach tools by firmly pushing onto vacu-
um hose, hose wand or extension wand.
Be sure the hose and tool fit snuggly
together by twisting tightly.
Dusting Brush/Upholstery Tool:
Two types of cleaning tools in one attachment.
• Use brush side to dust furniture,
blinds, books, lamps, shelves and
baseboards.
• Use upholstery side for cushions,
draperies and fabrics.
Crevice Tool: Use in tight narrow spaces.
Extension Wand: Use with desired attachment
for a longer reach.
Hose Wand: Use with desired attachment
for a longer reach or for cleaning hard to
reach places.
TurboBrush: Use rotating brush action for
small flat areas such as cushions and beds.
NOTE: Press gently down and pull
towards you in a raking motion. Too
much pressure will cause the brush
to stop rotating. CAUTION:
The rotating floor brush continues
to rotate while tools are in use. To
reduce the risk of injury from mov-
ing parts, always move the cleaner
with the carrying handle. Always
place vacuum cleaner on the floor
with handle in upright position
when using tools. Never place your
fingers under the cleaner when it is
running. Never place powerfoot on
furniture or uneven surfaces. Do not
place vacuum cleaner close enough
to objects to pull them into rotating
brush.
Tip:
Before cleaning
under low furniture,
check area first for
objects that might
harm the unit or
block the vacuum
hose.
Dusting Brush/
Upholstery Tool
Extension Wand
Crevice Tool
Hose Wand
Base
Hose Wand
TurboBrush