Bissell 2635 - Manual (Page 5)

w w w. b i s s e l l . c o m
O
perations
5
Filling with water
1. Push down on the safety cap while
turning counter clockwise.
2. Fill measuring cup to the max fill line.
3. Slowly pour water into steamer.
4. Replace the safety cap by pushing
down while turning clockwise.
NOTE: You may substitute
distilled or demineralized
water for tap water.
If your tap water contains a high level
of mineral content (hard water) the use
of distilled or demineralized water is
recommended.
Do not add anything except cool water
or you will cause damage to the heating
element and void your warranty.
Power cord
Unwrap power cord before operating unit.
Indicator light
The red indicator light will go on when the
unit is first plugged in. When the steamer
is ready to use, the light will turn off.
Steam trigger
Push to release steam.
CAUTION:
Always unplug your Steam Shot
before filling/refilling. Press trigger
until Steamer depressurizes. Wait
5 minutes before removing cap.
CAUTION:
Before disconnecting a tool from
the steam cleaner, make certain
that steam is no longer coming
from the nozzle. Use an oven mitt
to remove tools, or wait until they
cool before removing.
1. 2.
3. 4.