5 switching off the lamellar grinding machine, Sm-90 lamellar grinding machine 21 – Dick SM-90 230V User Manual
Page 53
SM-90 lamellar grinding machine
21
Putting into operation
7
Switch on the lamellar grinding machine as follows:
1 Insert the plug into the socket.
2 Press the green button (switch) at the switch.
3 Check the direction of rotation when starting up the lamellar
grinding machine.
- The direction of rotation is given by arrows on the covers.
7.5
Switching off the lamellar grinding machine
1 Press the red switch (switch, Item [1]).
2 Wait until the lamellar grinding wheel and the polishing
wheel stop.
WEAR SUITABLE PROTECTIVE CLOTHING
Rotating machine parts can catch unsuitable clothing or long hair.
Abrasive particles spun off the machine or loud machine noises
can damage eyes and ears.
Sharp and hot workpieces can cause injuries to hands.
Rotating abrasives can pull off pieces of clothing.
• Ensure good lighting is available,
• wear tight-fitting clothing,
• do not wear jewellery,
• wear a hair net on long hair,
• wear safety glasses or goggles,
• wear hearing protection,
• wear suitable protective gloves,
• do not touch rotating machine parts with parts of the body
covered with fabric.