Dogtra 300M Series - Manual (Page 7)

10
DESCRIPTION OF TRANSMITTER PARTS
Transmitter Battery Charging Receptacle &
Rubber Plug
Located on the backside of the transmitter,
the charging receptacle is covered by a rubber
plug. Insert one end of the battery charging cable
into the receptacle to charge the battery (See
Battery Charging Procedure on page 25).
After charging is completed, close the
receptacle with its rubber plug to make sure dirt
or water does not get inside.
11
BUTTON FUNCTIONS
The transmitter for the
single dog unit has three buttons (one on the
face of the transmitter, two on the left side).
BUTTON FUNCTIONS
Nick Button
Pager Button
Constant Button
(1-dog unit)
“Nick” Button
The “Nick” button is located on the top left.
It is imprinted with the letter “N” for an easy,
clear selection. When the “Nick” button is
pushed the receiver emits a single rapid pulse of
electrical stimulation.