Dogtra QL - Manual (Page 11)

18
2) Place the release lever under the latch roller
bearing.
3) Turn the receiver on. Make sure that the safety
pin has been pulled out.
Figure 5. Setting the latch.
ASSEMBLY AND OPERATION
19
4) Press the transmitter’s left or right launcher
button depending on which jack (left or right)
it’s connected to. The remote launcher is
working properly if the bird cradle pops open
like the diagram above.
5) Press the transmitter’s beeper button or duck
call button. You’ll know it’s working properly
if the receiver sound horn emits a loud beep or
quacking sound.
Figure 6. Remote launcher released.
ASSEMBLY AND OPERATION