Drucker Diagnostics Model 614B Centrifuge User Manual
Page 2
Page 2
Model Description:
The Model 614B is a continuous duty centrifuge designed for the small lab or
doctor’s office for the purposes of separating laboratory fluids. The unit is controlled
by a mechanical timer settable from 1 to 30 minutes. Samples can be safely viewed
through the transparent lid. In the event that the lid is opened during a run, the
power to the motor is disconnected.
For warranty information, turn to page 10.
* The rotor and rotor accessories are rated for a rotation frequency of 3,500 RPM.
Table of Contents
Model Description
pg. 2
Supplied Equipment
pg. 2
Features
pg. 3
Specifications
pg. 3
Setup Location and Procedure
pg. 4
Operation
pg. 5
Rotor Removal and Installation
pg. 5
Tube Holder Configurations
pg. 6
Care and Preventative Maintenance pg. 7,8
Safety
pg. 8
Calibration and Ground Testing
pg. 8
Troubleshooting
pg. 8
Replacement Parts
pg. 9
Available Accessories
pg. 9
Warranty
pg. 10
WARNING:
For the safety of both the
operator and service personnel, care should
be taken when using this centrifuge if
handling substances that are known to be
toxic, radioactive or contaminated with
pathogenic microorganisms. When Risk
Group II materials are used, (as identified in
the World Health Organization “Laboratory
Bio–Safety Manual”), a Bio–Seal should be
employed. The Bio–Seal accessory for the
model 614 tube holders is the non–aerosol
shield cap, p/n 7713011. In the event that
materials of a higher risk group are being
used, more than one level of protection must
be provided. The use of flammable or ex-
plosive materials as well as those materials
which have a vigorous chemical reaction is
prohibited.
For your safety and the durability
of your machine, never transport or store
centrifuge with tube holders inside machine.
Supplied Equipment*:
The following items come standard with each
Model 614B centrifuge:
1. One (1) six-place fixed-angle rotor
2. Operator’s manual
p/n 03-0-0002-0040
3. Six (6) 125 mm tube holders
4. Six (6) 100 mm tube holders
5. Six (6) 75 mm tube holders
1.
p/n
7786047
p/n
7713032
p/n
7713031
p/n
7713033
x 6
4.
x 6
3.
x 6
5.
2.
Operator’s Manual
Model
614B • Laboratory Centrifuge
Rev. A
P/N 03-0-0002-0040
NOTES:
Page 11