Edge Lighting Plaza Large LED - Dimmable - Manual (Page 2)

2
D 6: Feed the 120 VAC power wires through the mounting plate.
7: Line up the mounting plate holes with the anchors and
secure it with the eight #8-32 screws provided.
8: Ensure the mounting plate is grounded in accordance with
local electrical codes.
9: On the Wago connector that connects the 120V hot
transformer wires, pull up an available lock lever and insert
the 120VAC hot power wire. Press the lock lever down to
connect and lock into place.
10: On the Wago connector that connects the 120V neutral
transformer wires, pull up an available lock lever and insert
the 120VAC neutral power wire. Press the lock lever down
to connect and lock into place.
MIRROR
MOUNTING
PLATE
WALL
8-32 SCREW
(8X)
120 VAC
POWER
WIRES
MOUNTING
PLATE
M6 SCREW
11: Carefully place the mirror onto the mounting plate.
12: Secure the mirror to the mounting place by tightening four
M6 screws using an 3mm Allen wrench.
6
7
PSU
HOT
WIRES
PSU
NEUTRAL
WIRES
120
VAC
HOT
WIRE 120
VAC
NEU
WIRE
PUSH
DOWN
TO LOCK PUSH
DOWN
TO LOCK
WAGO
CONNECTORS
(2X)
9
10
12
11
NOTE: Contains integrated 24V LED lights consuming a total of
110 Watts.
E
F