CH Tech M221 - Manual

C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012
(512) 733-2621 • FAX (512) 733-2629 • www.chtech.com
AC Characteristics:
Bandwidth (-3dB): >10 MHz (typ)
Crosstalk (typical)
<100 KHz: <-70 dB
<1 MHz <-50 dB
<10 MHz <-n/a dB
Close channel capacitance:
Ch-to-ch: <30 pF (typical)
Ch-to-com: <40 pF (typical)
Typical Relay Life at Rated Load:
10E5 operations
Time to open or close: 13 msec
Connectors: 44 pin DSUB
(Female)
Temperature:
Operating: 0°C to 55°C
Storage: -40°C to 75°C
Power: +5V @ 0.02 A
+12V @ 0.13 A
M Module Compliance
Complies with ANSI/VITA Std 12-
1996 for single-wide M Modules.
Data Transfers 16 bit
Interrupts INTC
Compatible with VXI, VME, PCI,
PXI, CPCI & Ethernet Carriers
Applications
• LF Signal Switching
• Microwave relay control
Ordering Information
Part Number 11029560-0001
Additional Information
User Manuals for C&H carriers and
this module can be found on our
website at www.chtech.com.
Specifications:
Inputs:
Maximum Voltage (terminal to
terminal or chassis)**
DC: 60V/200V
AC rms: 48V/141V
AC peak: 68V/200V
Maximum Current (non-inductive)
Per Switch:
DC: 1A
AC peak: 1A
AC rms: 0.7A
Maximum Power Per Switch/Per
Module:
DC:
40W/100W
AC: 40VA/100VA
DC Characteristics**:
Thermal Offset: <20_V (typical)
Contact Resistance: <n/a_
Contact Resistance (EOL): <3.5_
Insulation Resistance:
10E7 _
** See manual for conditions
M221
8 Channel
Form C Switch
M Module
The M221 (formerly Agilent
E2273A) provides 8 independent
non-latching SPDT switches with
maskable interrupts that occur when
the requested relay movements
have been made. This M Module is
useful when high integrity contacts
are needed driving microwave
relays located in your test adapter.