FASS T D02 150G - Manual (Page 11)

A. Using thread tape, install the 10-300 into “E” and the 10-301 into the “T” port (on opposite end).
Torque to 40 lb./ft.²
Note: Do Not Put Thread Tape on Flare of Fitting ***The use of
thread sealant is not recommended***
B. For fitting purposes. Secure PBR-2001 to pump assembly lightly with (3) 1/4”-20x1 3/4 bolts and (3)
WA-1001D. Assembly will be used in future steps for correct fitting of brackets. (Note: Bracket
maybe flipped to accommodate your application.)