FASS T F17 200G User Manual
Page 14
Advertising
D.
Secure PFB-2002 and RS-2001 with (1) hex bolt
1/2” -20 x 1 1/2” and (1) 1/2” washer to PFB-2002C
C.
Insert PFB-2002C in to bed channel align the nut with the opening on the channel.
.
E.
Disconnect the factory power plug to the factory lift pump. Plug female plug of the WH-1005 harness
into the FASS pump. Reconnect the vehicles battery. Turn key on. With pump operating, liberally
spray WD-40 (or equivalent) into Water Separator nipple. This process helps lubricate the gear for easi-
er initial priming.
Advertising