FASS T F16 150G - Manual (Page 11)

D. Secure PFB-2002 and RS-2001 with (1) hex bolt 1/2” -20 x 1 1/2” and (1) 1/2” washer to PFB-2002C
C. Insert PFB-2002C in to bed channel align the nut with the opening on the channel.
.
E. Disconnect the factory power plug to the HFCM lift pump. Clean plug and install the WE-1006 con-
nector. Plug female plug of the WH-1002 harness into FASS pump. Be sure to finish routing wire
harness along frame before mounting into position.