Fitbit Zip - Manual (Page 5)

2
Before you begin
1. Remove your Zip from its packaging and then use the battery door tool to
unlock the battery door. Insert the tool into the slot on the back of the unit,
and turn the door counterclockwise to remove it.
2. Once the door has been removed, insert the provided battery into the back of
the unit, with the “+” sign facing up. The battery will rest in the center of the
compartment.
3. Once the battery is in place, align the arrow on the battery door with the
‘unlock’ icon on your Zip to put the battery door in place. Use the battery door
tool to ‘lock’ the battery door by turning it clockwise until the arrow on the
door lines up with the ‘lock’ icon.
4. Once the display comes on, you will be ready to proceed with setup. The
device version of your Zip will appear on the display, followed by a series of
smiley faces, which are used to represent your activity level. The display will
remain on for 30 minutes after inserting the battery.
5. Take the wireless sync dongle from the box and plug it into a USB port on
your computer.
6. You are now ready to install Fitbit Connect.