Freedom Designs Freedom 2 - Manual (Page 41)

41
Freedom Designs, Inc. Freedom 2 / Freedom 2 Kids
Freedom 2 / Freedom 2 Kids
Adjustments continued………..
Rear Axle Adjustment
The position of the rear axle is the most critical
adjustment on the Freedom 2 family of
wheelchairs. The center of gravity and the seat
height position are all determined by the axle
adjustment.
Warning: Your healthcare professional
should assist you in adjusting the axle
position. Position of the axle will be based on
your abilities and limitations.
Fixed Back Frame
1. Center of gravity adjustment may be
accomplished by moving the rear axle
forward or backward on the axle plate.
2. Rear axle plates are available for 0º, 3º and
6º camber angle.
3. Seat height and/or angle may be changed
by changing the position of the axle plate
upward or downward.
Folding Back Frame
1. Center of gravity adjustment may be
accomplished by moving the rear axle plate
forward or backward on the frame.
2. Rear axle plates are available for 0º, 3º and
6º camber angle.
3. Seat height and/or angle may be changed
by changing the position of the axle
upward or downward on the axle plate.
Warning: Your healthcare professional
should assist you in adjusting the axle
position. Position of the axle will be based on
your abilities and limitations.
Warning: The wheelchairs become less
stable if forward axle positions are used. The
further forward the axles are positioned, the
easier it is to tip the chair over forward or
backward. Moving the axle backward will
increase the stability of the chair. This
backward adjustment will create increased
turning pressure.
Note: A front caster adjustment should be made to
correspond with any changes in rear seat height/angle.