BMW 328d xDrive Sports Wagon 2014 User Manual

Page 130

Advertising
background image

Automatic deactivation during forward

travel

The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on if necessary.

With front PDC: switching on/off

manually

Press the button.

On: the LED lights up.

Off: the LED goes out.

Display

Signal tones

When approaching an object, an intermittent
tone is sounded that indicates the position of
the object. For example, if an object is de‐
tected to the left rear of the vehicle, a signal
tone sounds from the left rear speaker.
The shorter the distance to the object be‐
comes, the shorter the intervals.
If the distance to a detected object is less than
approx. 10 in/25 cm, a continuous tone is
sounded.
With front PDC: if objects are located both in
front of and behind the vehicle, an alternating
continuous signal is sounded.
The signal tone is switched off:

When the vehicle moves away from an ob‐
ject by more than approx. 4 in/10 cm.

When selector lever position P is engaged
on vehicles with automatic transmission.

Volume

The volume of the PDC signal tone can be ad‐
justed similar to the tone and volume settings
of the radio.
The setting is stored for the remote control
currently in use.

Visual warning

The approach of the vehicle to an object can
be shown on the Control Display. Objects that
are farther away are displayed on the Control
Display before a signal tone sounds.
A display appears as soon as Park Distance
Control (PDC) is activated.
The range of the sensors is represented in the
colors red, green and yellow.
When the image of the rearview camera is dis‐
played, the switch can be made to PDC:

"Rear view camera"

System limits

Limits of ultrasonic measurement

The detection of objects can reach the physi‐
cal limits of ultrasonic measurement, e.g., in
the following circumstances:

For small children and animals.

For persons with certain clothing, e.g.
coats.

If there is an external disturbance of the ul‐
trasound, e.g. from passing vehicles or
loud machines.

When sensors are dirty, iced over, dam‐
aged or out of position.

Under certain weather conditions, such as
high relative humidity, rain, snowfall ex‐
treme heat or strong wind.

With tow bars and trailer hitches of other
vehicles.

With thin or wedge-shaped objects.

With moving objects.

With elevated, protruding objects such as
ledges or cargo.

With objects with corners and sharp edges.

With objects with a fine surface structure,
such as fences.

For objects with porous surfaces.

Seite 130

Controls

Driving comfort

130

Online Edition for Part no. 01 40 2 925 793 - II/14

Advertising
This manual is related to the following products: