BMW 128i Convertible 2011 User Manual
Page 208
Advertising
Under t
h
e
ho
od
206
Checking coolant level
1.
Do not open the engine hood before the
engine has cooled down.
2.
Turn the cap of the expansion tank a little
counterclockwise to allow any accumulated
pressure to escape, then continue turning
to open.
3.
The coolant level is correct if it is between
the maximum and minimum marks in the
filler neck, refer also to the diagram next to
the filler neck.
4.
If the coolant is low, slowly add coolant up to
the specified level; do not overfill.
5.
Turn the cap until there is an audible click.
6.
Have the reason for the coolant loss elimi-
nated as soon as possible.
Online Edition for Part no. 01 41 2 604 129 - © 02/10 BMW AG
Advertising