Replacing components, Onboard toolkit, Replacing wiper blades – BMW X6 xDrive50i 2011 User Manual

Page 264: Lamps and bulbs

Advertising
background image

Replacing components

262

Replacing components

Onboard toolkit

The onboard toolkit is located in the cargo area
under the floor panel.

Replacing wiper blades

Front

1.

Fold down the wiper arm.

2.

Swing the wiper blade upward.

3.

Remove the wiper blade toward the wind-
shield, refer to arrow.

BMW X5: rear

1.

Lift off the wiper arm completely and pull off
the wiper blade, refer to arrow.

2.

Mount the new wiper blade and press on
until it is heard to engage.

Lamps and bulbs

Lamps and bulbs make an essential contribu-
tion to vehicle safety. You must be duly diligent
in replacing them. BMW recommends having
your BMW Sports Activity Vehicle Center per-
form any work that you do not feel competent to
perform yourself or that is not described here.

Never touch the glass of new bulbs with
your bare fingers, as even minute

amounts of contamination will burn into the
bulb's surface and reduce its service life. Use a
clean cloth, napkin, etc., or hold the bulb by its
metal socket.

<

A replacement bulb set is available from your
BMW Sports Activity Vehicle Center.

Only replace bulbs when cool, as other-
wise you may be burned.

<

Whenever you perform any work on the
electrical system, turn off the systems/

consumers involved to prevent short circuits
from occurring. To avoid possible injury or
equipment damage when replacing bulbs,
observe any instructions provided by the bulb
manufacturer.

<

Online Edition for Part no. 01 41 2 604 009 - © 03/10 BMW AG

Online Edition for Part no. 01 41 2 604 009 - © 03/10 BMW AG

Advertising