BMW 328i Convertible 2010 - Manual (Page 228)

Replacing components
226
1 Turn signal
2 Roadside parking lamp/tail lamp, LED
3 Backup lamp
4 Brake lamp, consisting of two individual
bulbs
5 Brake Force Display lamp
6 Roadside parking lamp/tail lamp, LED
If one of the bulbs
2 to 6 malfunctions, please
contact your BMW center or a workshop that
works according to BMW repair procedures
with correspondingly trained personnel.
Fender-mounted lamps
Coupe
1. Left-hand side: use a screwdriver to pry off
the cover in the cargo area and remove the
cover.
Right-hand side: remove the cover from the
right-hand side panel of the cargo area.
2. Loosen the bulb holder at the clip, see
arrow, and pull out.
3. Turn signal indicator: apply gentle pressure
to the bulb while turning it to the left for
removal and replacement.
Backup lamps and brake lamps: take out
the bulbs and change them.
4. Re-engage the bulb holder so that it audibly
clicks into place.
5. Reattach the cover in the cargo area.
Convertible
1. Turn the screws on the corresponding side,
see arrow, by 90° and remove the cover.
2. While applying light pressure, turn the bulb
holder of the turn signal bulb to the left.
3. Remove and replace the bulb.
4. Re-engage the bulb holder so that it audibly
clicks into place.
5. Reattach the cover in the cargo area.
Online Edition for Part no. 01 41 2 603 085 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 603 085 - © 08/09 BMW AG